{"title":"Relay Modules, Relays","description":"\u003cp\u003eRelay Modules, Relays\u003c\/p\u003e","products":[{"product_id":"16-channel-12v-relay-module-board","title":"ROBODIUM 16 Channel Relay Module Board, 12V DC, Industrial Control, MCU Compatible, 11x9x3cm","description":"16 Channel 12V Relay Module Board","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389239972211,"sku":"R0906","price":628.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/16Channel1.jpg?v=1774845150"},{"product_id":"esp8266-wifi-5v-1-channel-relay-module-iot-smart-home-remote-control-switch","title":"ESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch","description":"\u003cp\u003eThis WiFi relay module carries a ESP8266 WiFi module and micro controller. It will send the serial port instructions to the cell phone APP and Implementation within the local area network (LAN) for wireless control relay.\u003c\/p\u003e\u003cp\u003eThis module is ideally suited to controlling larger voltages in your project through WIFI. This is a 1 channel relay module which can be used to activate up to 250V AC and 30V DC. This allows you to build in device control, operating remote lights or triggering systems when the module is supplied with a signal from an ESP8266 module (included).\u003c\/p\u003e\u003cp\u003eThe module has and LED that lights relative to the state of the module. A red power activation LED that lights when a signal is received on the IN pin. When a signal is received a audible click can be heard as the relay triggers, connecting the output pins.The relay is controlled via the included ESP8266. This will require configuration via UART to prior to full operation. Once it is programmed and powered it will look after itself, making it ideal for use in internet of things \"IOT\" based projects.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use:-\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eOnboard ESP8266 WIFI module has three operating modes: STA (client), AP (hot), STA + AP (client + hot), according to the work of the module to select the corresponding WIFI module mode of operation The\u003c\/p\u003e\u003cp\u003eThe module needs to use the serial debugging software on the computer and USB to TTL module to send AT commands to configure the WIFI module, USB to TTL module RX, TX, GND pin, then the module on the TX, RX, GND pin, IN +, IN – 5V power supply.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eGeneral Info:-\u003c\/strong\u003e\u003c\/h3\u003e\u003ch3\u003e Onboard ESP8266 WIFI module, AP mode can be connected at the same time 5 client\u003c\/h3\u003e\u003cp\u003eThe module has two ways to work:\u003c\/p\u003e\u003cp\u003e(i) mobile phone directly mounted on the WIFI module;\u003c\/p\u003e\u003cp\u003e(ii) mobile phone and WIFI module also carried on the router.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTransmission distance:-\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eOpen environment, the mobile phone mounted on the WIFI module when the maximum transmission distance of 400m.\u003c\/p\u003e\u003cp\u003eWhen the WiFI module and mobile phone at the same time carried on the router when the transmission distance according to the router’s signal weakly;\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eControl Commands:-\u003c\/strong\u003e\u003c\/h3\u003e\u003ch3\u003e\u003cstrong\u003eWhen cell phone equipped with WiFi module sends commands in the following order:\u003c\/strong\u003e\u003c\/h3\u003e\u003ch3\u003e\u003cstrong\u003e(The default baud rate 115200)\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eAT+CWMODE=2, namely AP mode is selected.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAT+RST, reset.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAT+CIPMUX=1, open multiple connections.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAT+CIPSERVER=1,8080, configure the TCP server, set the port.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAT+CIOBAUD=9600 set the baud rate to 9600. (working in relays to control the baud rate 9600).\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAT+CIFSR to view the AP mode IP address, such as the APIP, “192.168.4.1”.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCell phone WIFI signal connection name starts with AI-THINKER or ESP8266.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIn the “TCP connection” address and port into the APP, such as 192.168.4.1 and 8080.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eClick on the grey box relays can be controlled.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eFeatures:-\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eOnboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOperating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDiode effusion protection;\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eShort response time\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOnboard Relay:5V,10A\/250V AC 10A\/30V DC relay\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTransmission Distance : 400m (max)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBaud Rate: 9600.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389242364275,"sku":"R0407","price":361.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/esp8266-wifi-5v-1-channel-iot-relay-module-800x800.jpg?v=1766373635"},{"product_id":"4-channel-5v-relay-module-with-optocoupler","title":"4 Channel 5V Relay Module with Optocoupler","description":"\u003cp\u003eThis is a 4-Channel Isolated 5V 10A Relay Module, compatible with a wide range of microcontrollers, including Arduino, AVR, PIC, ARM, and more.\u003c\/p\u003e\u003cp\u003eIt’s capable of controlling various high-current devices and appliances. The module supports a maximum relay contact output of AC 250V 10A or DC 5V 10A, allowing direct interfacing with microcontrollers via a standard connection.\u003c\/p\u003e\u003cp\u003eEquipped with red status indicator LEDs for each relay, the module ensures safer operation and easy monitoring. It finds applications across multiple domains, such as microcontroller-based control systems, industrial automation, PLC control systems, and smart home automation.\u003c\/p\u003e\u003cp\u003ePerfect for projects using the Raspberry Pi, this relay module features four 5V relays, each rated at 10A\/250V. It allows switching of up to four high-voltage or high-current loads through simple microcontroller commands.\u003c\/p\u003e\u003cp\u003eEach relay is opto-isolated and can be independently controlled using a digital input. The module operates on an input voltage as low as 1.0V and supports up to 5V, making it suitable for various devices with logic levels in that range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications and Features:-\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003eOne normally closed contact and one normally open contact\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eChannel: 4 channel\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRelay Operating Voltage: 3.3V to 5V\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTriode drive, increasing relay coil\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHigh impedance controller pin\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePull-down circuit for avoidance of malfunction\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower supply indicator and Control indicator lamp\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower supply and relay instructions, lit, disconnect is off;\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eInput signal, signal, common Terminal and start conducting;\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUseful for appliance control;\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDC or AC signal, control, you can control the 220V AC load;\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThere is a normally open and one normally close contact;\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe module is compliant with international safety standards, control and load areas isolation trenches.\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389254848883,"sku":"R0678","price":216.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/4-channel-5v-relay-module-800x800_31cbcb6d-1cb1-4c03-bce6-6b63319a9b11.jpg?v=1766373750"},{"product_id":"5v-2-channel-usb-pc-intelligent-control-relay-module","title":"5V 2 channel USB PC Intelligent Control Relay Module","description":"\u003cp\u003eThis 5V 2 channel USB PC Intelligent Control Relay Module uses HID technology and high quality so no need use the driver. Just you need to download data which comes inside the application and plug and play. It supports Windows 7, XP 32 systems.\u003c\/p\u003e\u003cp\u003eIt has Military level PCB production. Available with 4-channel, 8-channel power connector, after connecting the power. Even if you plug out the USB or turn off the computer, a relay can still keep setting condition. It has fix hole size is 3mm and fix hole central moment: 52.2mm x 36.6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications :\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003eHome automation\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRobotics Control\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eControl doors and windows via windows system\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eController power supply etc.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003eOnboard square USB interface, stable connection.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUse imported high-performance USB control chip.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eApplication code: Green indicates that the relay is closed, the red disconnect\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMilitary grade PCB board production.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUse genuine pine music relay\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSupport Windows 7, XP 32-bit systems\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003ePackage Includes :\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1 x 5V 2 channel USB PC Intelligent Control Relay Module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications :-\u003c\/strong\u003e\u003c\/p\u003e\u003ctable class=\"border-collapse border border-gray-300\" style=\"min-width: 50px;\"\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"min-width: 25px;\"\u003e\n\u003ccol style=\"min-width: 25px;\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eOperating Voltage (VDC)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e5\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eTrigger Voltage (VDC)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e5\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eTrigger Current (mA)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e20\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eSwitching Voltage (VAC)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e250@10A\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eSwitching Voltage (VDC)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e30@10A\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eOpt. Relative Humidity(RH)               \u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e20% 85%\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eStorage condition ()\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e-40 to 80\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eOperating Temperature (C)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e-40 to 85\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eLength (mm)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e63\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eWidth (mm)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e41\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eHeight (mm)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e17\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eWeight (gm)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e30\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389256454515,"sku":"R0639","price":564.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/5v-2-channel-usb-pc-intelligent-control-relay-module-800x800.jpg?v=1766373761"},{"product_id":"6v-10a-pcb-mount-sugar-cube-relay-spdt","title":"6V 10A PCB Mount Sugar Cube Relay - SPDT","description":"\u003cp\u003e6 Volt 10 Ampere SPDT PCB Mount Relay\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389260779891,"sku":"R0619","price":51.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/6v-10a-spdt-relay-800x800.jpg?v=1766373796"},{"product_id":"2-channel-24v-high-and-low-level-trigger-relay-module","title":"2 Channel 24V High and Low Level Trigger Relay Module","description":"\u003cp\u003eExperience flexible relay control with the 2 Channel 24V High and Low Level Trigger Relay Module with Optocoupler. This module features two independent channels for versatile management of devices or circuits. The optocoupler isolation ensures dependable performance by protecting the control circuit from voltage spikes and electrical noise.\u003c\/p\u003e\u003cp\u003eWhat distinguishes this module is its onboard terminal for selecting high and low-level triggers. This allows you to operate the relay module in either mode, providing additional customization to meet your specific requirements. Streamline your projects and improve precision with this compact yet powerful relay module, designed for convenience and adaptability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The image may differ from the actual product in terms of brand name or board color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:-\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003e2 LEDs to indicate when relays are ON.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWorks with logic-level signals from 3.3V or 5V devices\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOption to make it High Level and Low Level Trigger\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOpto isolation circuitry\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eModule with diode current protection, short response time\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAround the board with 4 mounting holes, hole diameter 3. 1 mm, easy installation and fixing\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:-\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003eDefault Relay trigger Setting : Low-Level\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLogic Input (V) : 3.3 ~ 5\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTrigger Voltage (VDC) : 24\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSwitching Voltage (VAC) : 250@10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSwitching Voltage (VDC) : 30@10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProduct dimensions (mm): 50x 41 x 20\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProduct weight (g): 30\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePackage Includes:-\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1 x 2 Channel Relay Module 24V High and Low Level Trigger Relay Controller\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389277884787,"sku":"R0748","price":188.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/2-channel-24v-high-and-low-level-trigger-relay-module-800x800.jpg?v=1766373852"},{"product_id":"dc5v-1-channel-relay-module-delay-timer-control-switch-board","title":"DC5V 1 Channel Relay Module Delay Timer Control Switch Board","description":"\u003cp\u003eIntroducing the DC 5V 1-Channel Relay Module with Delay Timer Control Switch Board, a state-of-the-art solution designed for ease of use and enhanced performance. This upgraded module includes key improvements to meet evolving user requirements, such as an enhanced power supply with anti-reverse protection for added safety. The module also features opto-isolated inputs and outputs, which improve anti-interference capabilities while reducing power consumption.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:-\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eEnhanced Safety with Anti-Reverse Function: \u003c\/strong\u003eNew upgrades include an increased power supply anti-reverse function for added safety in operations.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eOpto Isolated Input and Output: \u003c\/strong\u003eUtilizes opto-isolated input and output, enhancing anti-jamming capability and reducing power consumption for reliable performance.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eMemory Function for Last Setting Parameters: \u003c\/strong\u003eMemorizes the last setting parameters, ensuring continuity and convenience even after a power-off.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eExtended Signal Terminal Voltage Maintenance: \u003c\/strong\u003eSignal terminal voltage can be maintained for a long duration, promoting stability in various applications.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eIndustrial-Grade PCB Board:\u003c\/strong\u003eCrafted with an industrial-grade PCB board, ensuring robustness and reliability in diverse environments.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The actual product may vary in slight variation in color and components with the image shown depending upon quantity availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:-\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTiming Range (Settable):\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cp\u003e0.1~99.9 seconds\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1~999 seconds\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1~999 minutes\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eWorking Voltage: \u003c\/strong\u003eDC 5V\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eSignal Voltage: \u003c\/strong\u003eDC 4~20V\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eOutput Capacity: \u003c\/strong\u003eCan control loads within DC 30V 5A or AC 220V 5A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eCurrent Consumption: \u003c\/strong\u003eStatic Current: 20mA; Working Current: 50mA\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003ePCB Dimensions: \u003c\/strong\u003e64 * 35 * 18mm (L * W * H)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003ePCB Weight: \u003c\/strong\u003e25g\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePackage Includes:-\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1 x DC 5V 1 Channel Relay Module Delay Timer Control Switch Board\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389310062963,"sku":"R0457","price":532.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/dc5v-1-channel-relay-module-delay-timer-control-switch-board-800x800.jpg?v=1766373894"},{"product_id":"2-channel-5v-relay-module","title":"2 Channel 5V Relay Module","description":"\u003cp\u003eThis is a 2-Channel 5V Relay module designed to control various appliances and equipment with high current. It can be directly controlled by microcontrollers such as 8051, AVR, PIC, DSP, ARM, and MSP430, as well as TTL logic. Each channel requires a driver current of 15-20mA and is equipped with high-current relays rated for AC250V at 10A and DC30V at 10A. The module features a standard interface for direct microcontroller control, along with indicator LEDs to display the relay output status.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:-\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eThe module using Single relay control.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePower indicator (green), Two ways of relay status indicator light (red).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUsing 8550 transistor-driven, strong driving ability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHas the fixed bolt hole and easy installation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes:-\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e1 x 5V 2 Channel Relay Module.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications :-\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ctable class=\"shop_attributes woocommerce-group-attributes-layout-2\" height=\"485\" style=\"width: 90.3285%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eOperating Voltage (VDC)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e2.5 ~ 5.5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eTrigger Voltage (VDC)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eTrigger Current (mA)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e20\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eSwitching Voltage (VAC)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e250@10A\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eSwitching Voltage (VDC)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e30@10A\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eOperating Temperature (C)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e-40 to 85\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eOpt. Relative Humidity(RH)            \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e20% 85%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eStorage condition ()\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e65 to 125\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eLength (mm)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e43\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eWidth (mm)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e43\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eHeight (mm)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e17\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 77.1825%;\"\u003e\u003cspan\u003eWeight (gm)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 22.4206%;\"\u003e\n\u003cp\u003e\u003cspan\u003e25\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389420458355,"sku":"R0745","price":74.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/5v-2-channel-relay-module-800x800.jpg?v=1766374155"},{"product_id":"4-channel-5v-relay-module","title":"4 Channel 5V Relay Board","description":"\u003ch2\u003e4 Channel 5V Relay Board\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan class=\"a-list-item\"\u003eThe 4 Channel 5V Relay Board is a low-pull, high-release relay module equipped with an energisation status indicator LED, while the release status LED remains off.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThis relay module operates at 5V and utilises JD-VCC for powering the relays, ensuring compliance with international safety standards and providing isolation between control and load areas.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eDesigned for versatility, the 4 Channel Relay Module is ideal for managing high voltage and high current applications, such as motors, solenoid valves, lamps, and AC loads. It seamlessly interfaces with microcontrollers like Arduino and PIC.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eEach relay terminal (COM, NO, and NC) is accessible via a screw terminal, and the board includes an LED indicator to reflect the operational status.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan class=\"a-list-item\"\u003eThis relay module is suitable for controlling a wide range of appliances and equipment that require substantial current.\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003eThe relay module supports a maximum output of AC250V 10A and DC5V 10A.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"a-list-item\"\u003eApplications:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"EN-US\" style=\"color: #000000;\"\u003eMains load switching\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"EN-US\" style=\"color: #000000;\"\u003eHome automation systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"EN-US\" style=\"color: #000000;\"\u003eBattery backup solutions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"EN-US\" style=\"color: #000000;\"\u003eSwitching high current loads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"height: 231px; border-color: #000000; margin-left: auto; margin-right: auto;\" border=\"3\" width=\"414\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 197.6px;\"\u003e\u003cspan style=\"color: #000000;\"\u003eNumber of Channels \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 198.4px;\"\u003e\u003cspan style=\"color: #000000;\"\u003e4\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 197.6px;\"\u003e\u003cspan style=\"color: #000000;\"\u003eOperating Voltage \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 198.4px;\"\u003e\u003cspan style=\"color: #000000;\"\u003e5V\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 197.6px;\"\u003e\u003cspan style=\"color: #000000;\"\u003eMax Output \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 198.4px;\"\u003e\u003cspan class=\"a-list-item\" style=\"color: #000000;\"\u003e AC250V 10A and DC5V 10A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 197.6px;\"\u003e\u003cspan style=\"color: #000000;\"\u003eDimensions \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 198.4px;\"\u003e\u003cspan style=\"color: #000000;\"\u003e5 x 3 x 1 cms \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 197.6px;\"\u003e\u003cspan style=\"color: #000000;\"\u003eWeight \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 198.4px;\"\u003e\u003cspan style=\"color: #000000;\"\u003e5 grams\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389430419827,"sku":"R0680","price":151.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/4-Channel_5V_Relay_Board_4-channel_5V_relay_board_for_electronics_projects..png?v=1775818123"},{"product_id":"12v-7a-pcb-mount-sugar-cube-relay-spdt","title":"12V 7A PCB Mount Sugar Cube Relay - SPDT","description":"\u003cp\u003eA relay is a switch operated electrically, featuring a set of input terminals for one or more control signals and a set of output contact terminals. The switch can include various contact types, such as make contacts, break contacts, or combinations of both.\u003c\/p\u003e\u003cp\u003eRelays are typically used when a circuit needs to be controlled by an independent low-power signal or when one signal must control multiple circuits. They were originally used in long-distance telegraph circuits as signal repeaters, refreshing and transmitting the signal from one circuit to another. Relays were also widely utilized in telephone exchanges and early computers to execute logical operations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:-\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eLow coil power consumption.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePCB mounting\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHigh Current Contacts\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRoHS Compliant\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompact Size\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eEconomically Priced\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:-\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eType : SPDT\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVoltage Rating : 12V\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCurrent : 7A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePCB Mount\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePins : 5\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLength : 18mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWidth : 15mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeight : 15 mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWeight : 10gm\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage Includes:-\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1 X 12V 7A PCB Mount Relay - SPDT\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389476917619,"sku":"R0784","price":19.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/12v-7amp-spdt-pcb-mount-relay-800x800.jpg?v=1766374322"},{"product_id":"1-channel-5v-relay-module-with-optocoupler-1","title":"1 Channel 5V Relay Module with Optocoupler","description":"\u003cp\u003eThis is a 1-channel 5V relay board module designed for use with Arduino, PIC, AVR, DSP, ARM, and various other microcontrollers.\u003c\/p\u003e\u003cp\u003eEach relay requires a driver current of 15mA to 20mA and is equipped with a high-current relay rated for DC 5V \/ 10A and AC 250V \/ 10A.\u003c\/p\u003e\u003cp\u003eThe module features a standard interface that is compatible with most microcontrollers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecification and Features :-\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e1 channel relay board\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOperating Voltage 5V\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMax Current : 20mA\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRelay Contact Current Capacity at AC250V: 10A\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRelay Contact Current Capacity at DC5V: 10A\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOne normally closed contact and one normally open contact\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTriode drive, increasing relay coil\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHigh impedance controller pin\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePull-down circuit for avoidance of malfunction\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower supply indicator lamp\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eControl indicator lamp\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIndicator for Relay output status\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCan Be controlled various appliances \u0026amp; other Equipment With Large current.\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStandard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe module is compliant with international safety standards, control and load areas isolation trenches.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389505818995,"sku":"R0835","price":126.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/s-l1600_0f3cdf85-54f2-4baa-9326-9227bfb99fe8.jpg?v=1766374370"},{"product_id":"mini-24v-pcb-mount-relay","title":"ROBODIUM 24V DC SPDT PCB Mount Relay, 7A, 230VAC\/120VDC Max Switching, 360mW Rated Power, 5-Pin","description":"\u003cp\u003eThis is a sealed 24 volt High quality Single Pole Double Throw (SPDT) Cube Relay. This relays can be used for switching High voltage 230 Volt devices and has current rating upto 7 ampere.  Ideal for using in your academic projects and for small device switching.\u003c\/p\u003e\u003ch2\u003eSpecifications Of 24 Volt 7 Ampere Cube relay:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eCoil Voltage: 24 Volt DC\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRated Coil Power: 360 mW\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eContact Form: SPDT\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMax Switching Voltage: 230 VAC \u0026amp; 120 VDC\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaximum Current Rating:    7 Ampere\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaximum DC Voltage Rating:  28 Volys\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eService Life: 10 Million Operations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePin Count :  5\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389506638195,"sku":"R0263","price":29.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/24V-Relay-800x800_d3f11c42-0dfc-4766-8944-dcf800d4e944.jpg?v=1766374391"},{"product_id":"12v-1-channel-relay-module-with-optocoupler","title":"12V 1 Channel Relay Module with optocoupler","description":"\u003ch3\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul style=\"font-size: medium; color: #000000;\"\u003e\n\u003cli\u003emodule can be set through the jumper wire high level or low level trigger\u003c\/li\u003e\n\u003cli\u003efault-tolerant design, even if the control line is broken, relay will not move\u003c\/li\u003e\n\u003cli\u003epower indicator light (green), relay status indicator light (red)\u003c\/li\u003e\n\u003cli\u003ehuman interface design, all interface can be directly by terminal connection leads, is very convenient\u003c\/li\u003e\n\u003cli\u003emodule size: 50 mm * 26 mm * 18.5 mm (length * width * height)\u003c\/li\u003e\n\u003cli\u003ewith optocoupler IC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eModule interface:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul style=\"color: #000000; font-size: medium;\"\u003e\n\u003cli\u003eDC + :positive\u003c\/li\u003e\n\u003cli\u003eDC - :negative\u003c\/li\u003e\n\u003cli\u003eIN :control high and low level\u003c\/li\u003e\n\u003cli\u003eNO :normally open interface\u003c\/li\u003e\n\u003cli\u003eCOM :public interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389510308211,"sku":"R0795","price":65.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/27_83152fd0-ad85-47c2-988e-ea0bcf994500.png?v=1766374435"},{"product_id":"5v-7amp-relay","title":"Mini 5V  7A DC Power Relay","description":"\u003cul\u003e\n\u003cli\u003e\u003cp\u003e100% New and high quality\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCoil Voltage: DC 5V;\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRated Load: 7A\/250V\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNumber of Pins: 5;\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eContact : SPDT\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSwitching capacity to 7A\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389526626675,"sku":"R0262","price":23.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/mini-5v-dc-power-relay-srd-5vdc-sl-c-5-pin-pcb-type-500x500.jpg?v=1766374548"},{"product_id":"ne555-delay-timer-switch-adjustable-12v-relay-module","title":"NE555 DC12V Digital Delay Timer | Relay Timer Module Switch | Adjustable 0 To 10 Seconds","description":"\u003cp\u003eThis NE555 Delay Monostable Switch Module item is a timer switch module, based on the NE555 chip, high-performance timing CPU design. The power indicator LED and switch trigger timing indication LEDs. Timing from microseconds to long hours. Applicable to vehicle equipment-delay to prevent car ignition, prevention of high sudden current to burn components and devices.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThis is a monostable generator based on the NE555 integrated circuit. It has an adjustable delay time from 0 to 10 seconds using the potentiometer or by changing the capacitance. It is also capable of controlling the device below 220V\/10A.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications \u0026amp; Features of NE555 Delay Timer Switch Adjustable 0-10 Sec 12V Relay Module:-\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eModule based on the NE555 chip.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eInput voltage: DC 12V\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAdjustable time: 0-10 s\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAC Control voltage: 250V\/max. 10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDC Control Voltage: 30V\/max. 10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMax. load: 2200W\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePrecision Pulse Generation \/ Timing.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMonostable Operation.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStandby no power consumption\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExcellent temperature stability of 0.005%\/°C\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389529051507,"sku":"R0228","price":69.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/NE555_Delay_1.jpg?v=1774842217"},{"product_id":"ne555-delay-timer-switch-adjustable-5v-relay-module","title":"NE555 Delay Timer Switch Adjustable 0-10 Sec 5V Relay Module","description":"\u003cp\u003eThis NE555 Delay Monostable Switch Module item is a timer switch module, based on the NE555 chip, high-performance timing CPU design. The power indicator LED and switch trigger timing indication LEDs. Timing from microseconds to long hours. Applicable to vehicle equipment-delay to prevent car ignition, prevention of high sudden current to burn components and devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures and Specifications:-\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eModule based on the NE555 chip.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eInput voltage: DC 5V\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAdjustable time: 0-10 s\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAC Control voltage: 250V\/max. 10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDC Control Voltage: 30V\/max. 10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMax. load: 2200W\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePrecision Pulse Generation \/ Timing.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMonostable Operation.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStandby no power consumption\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExcellent temperature stability of 0.005%\/°C     \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage Includes:-\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1 x NE555 Delay Timer Switch Adjustable 0-10 Sec 5V Relay Module\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389529084275,"sku":"R0227","price":111.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/NE555-Timer-Switch-Adjustable-Module-Time-delay-relay-Module-DC-5V-12V-Delay-Connect-Disconnect-relay.jpg?v=1766374558"},{"product_id":"1-channel-12v-relay-board","title":"12V 1 Channel Relay without Module","description":"\u003ch3\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul style=\"font-size: medium; color: #000000;\"\u003e\n\u003cli\u003emodule can be set through the jumper wire high level or low level trigger\u003c\/li\u003e\n\u003cli\u003efault-tolerant design, even if the control line is broken, relay will not move\u003c\/li\u003e\n\u003cli\u003epower indicator light (green), relay status indicator light (red)\u003c\/li\u003e\n\u003cli\u003ehuman interface design, all interface can be directly by terminal connection leads, is very convenient\u003c\/li\u003e\n\u003cli\u003emodule size: 50 mm * 26 mm * 18.5 mm (length * width * height)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eModule interface:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul style=\"color: #000000; font-size: medium;\"\u003e\n\u003cli\u003eDC + :positive\u003c\/li\u003e\n\u003cli\u003eDC - :negative\u003c\/li\u003e\n\u003cli\u003eIN :control high and low level\u003c\/li\u003e\n\u003cli\u003eNO :normally open interface\u003c\/li\u003e\n\u003cli\u003eCOM :public interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389530526067,"sku":"R0794","price":53.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/DC12VRelayModule1channel.jpg?v=1766374566"},{"product_id":"1-channel-5v-relay-module-without-optocoulper","title":"1 channel 5v Relay Module without Optocoupler","description":"\u003cp\u003eThis is 1 Channel 5V Relay Board Module For Arduino PIC AVR DSP ARM. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on can control it.\u003c\/p\u003e\u003cp\u003eEach one needs 15mA - 20mA driver current and Equipped with high current relay: DC 5V \/ 10A, AC 250V \/ 10A\u003c\/p\u003e\u003cp\u003eStandard interface that can be compatible with microcontroller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecification and Features :-\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e1 channel relay board\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOperating Voltage 5V\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMax Current : 20mA\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRelay Contact Current Capacity at AC250V: 10A\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRelay Contact Current Capacity at DC5V: 10A\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOne normally closed contact and one normally open contact\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTriode drive, increasing relay coil\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHigh impedance controller pin\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePull-down circuit for avoidance of malfunction\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower supply indicator lamp\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eControl indicator lamp\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIndicator for Relay output status\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCan Be controlled various appliances \u0026amp; other Equipment With Large current.\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStandard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe module is compliant with international safety standards, control and load areas isolation trenches.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389532754291,"sku":"R0834","price":62.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/1-channel-5v-relay-module-without-optocoupler-500x500.jpg?v=1766374570"},{"product_id":"8-channel-relay-control-panel-plc-relay-5v-module-with-optocoupler","title":"8 Channel 12V Relay  Module With Optocoupler","description":"\u003cp\u003eEach one needs 15-20mA Driver Current.; Equiped with high-current relay : DC30V 10A AC250V 10A.\u003cbr\u003e\nEach relay has normally open and normally closed contact.\u003cbr\u003e\nThe 8 channels are optically isolated, safe, reliable, anti-interference.; Can be selected by jumper relay and TTL or ground.\u003cbr\u003e\nWith power indicator, 8-way road has a status indicator.; With a relay coil to absorb the diode protection.\u003cbr\u003e\nThe circuit board size is 140mm X 55mm; Mounting hole size is 133mm X 40mm\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389539144051,"sku":"R0889","price":352.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/61xssjxvXaL._SL1100.jpg?v=1766374609"},{"product_id":"4-channel-5v-relay-module-with-octocoupler","title":"4 Channel 5V Relay Module with Octocoupler","description":"\u003cp\u003eThis is a 4 Channel Isolated 5V 10A Relay Module, compatible with a variety of microcontrollers such as Arduino, AVR, PIC, ARM, and others.\u003c\/p\u003e\u003cp\u003eIt can control different appliances and equipment that require high current. The relay outputs can handle a maximum contact rating of AC250V 10A and DC5V 10A. You can connect a microcontroller directly to it using a standard interface.\u003c\/p\u003e\u003cp\u003eThe red working status indicator lights enhance safety during use. This module has a wide range of applications, including MCU control, industrial settings, PLC control, and smart home systems.\u003c\/p\u003e\u003cp\u003eAre you ready to start switching with your Raspberry Pi? This compact relay module includes 4 x 5V relays, each rated for 10A\/250V. It's designed to switch up to 4 high-current (10A) or high-voltage (250V) loads with the aid of a microcontroller!\u003c\/p\u003e\u003cp\u003eEach relay can be turned on or off individually via an opto-isolated digital input, which connects directly to a microcontroller output pin. It requires only about 1.0V to activate the inputs while supporting input voltages up to 5V, making it ideal for devices operating between 1.0V and 5V.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications and Features:-\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eOne normally closed contact and one normally open contact\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eChannel: 4 channel\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRelay Operating Voltage: 3.3V to 5V\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTriode drive, increasing relay coil\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHigh impedance controller pin\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePull-down circuit for avoidance of malfunction\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower supply indicator and Control indicator lamp\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower supply and relay instructions, lit, disconnect is off;\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eInput signal, signal, common Terminal and start conducting;\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUseful for appliance control;\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDC or AC signal, control, you can control the 220V AC load;\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThere is a normally open and one normally close contact;\u003cbr\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe module is compliant with international safety standards, control and load areas isolation trenches.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389539340659,"sku":"R0679","price":244.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/4_Channel_Relay_Module_3_1024x1024_2x_2ea9fefd-4510-4907-b77e-5da063d62961.jpg?v=1766374616"},{"product_id":"2-channel-5v-relay-module-with-optocoupler-for-arduino-other","title":"2 Channel 5V Relay Module with Optocoupler","description":"\u003cp\u003eThis is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).\u003c\/p\u003e\n\u003cp\u003eIt has a 1x4 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the 2 relays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pins are marked on the PCB:-\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eGND - Connect 0V to this pin.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIN1 - Controls relay 1, active Low Relay will turn on when this input goes below about 2.0V\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIN2 - Controls relay 2, active Low Relay will turn on when this input goes below about 2.0V\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVCC - Connect 5V to this pin. Is used to power the opto couplers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:-\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigh current relay, AC250V 10A, DC5V 10A\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 LEDs to indicate when relays are on\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWorks with logic level signals from 3.3V or 5V devices\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpto isolation circuitry\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62389541765491,"sku":"R0744","price":75.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/2channelrelay3_e5aa501b-7370-448b-96ef-c59028738175.jpg?v=1766374624"},{"product_id":"dc-6-30v-one-way-relay-module-with-trigger-delay","title":"6-30V 1-Channel Relay Module with Adjustable Timing Cycle and LED Display","description":"\u003cp\u003eThe \u003cstrong\u003e6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle\u003c\/strong\u003e, designed for various automation and control applications. This versatile \u003ca target=\"_blank\" rel=\"noopener noreferrer nofollow\" class=\"text-blue-600 underline\" href=\"https:\/\/ROBODIUM.com\/collections\/relay\"\u003erelay module\u003c\/a\u003e features an easy-to-read Digital LED display and operates within a wide voltage range of 6-30V, also supporting micro USB 5.0V power supply for added convenience.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e6-30V Power Relay Module with Adjustable Timing\u003c\/strong\u003e is great for home automation and industrial uses. This device acts as a delay timer control switch and an adjustable timing cycle relay, making it useful for controlling lights, appliances, or machinery. It has a digital LED display for easy setup and monitoring, ensuring reliable performance for high voltage applications.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eWide Voltage Range: Operates between 6-30V, making it compatible with a variety of power sources.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAdjustable Timing Cycle: Set delay times ranging from 0.1 seconds to 999 minutes, providing flexibility for your automation needs.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHigh Output Capacity: Controls devices up to DC 30V 10A or AC 250V 10A, suitable for high-power applications.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptocoupler Isolation: Enhances anti-interference capability, ensuring stable performance.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eEmergency Stop Function: Features a \"STOP\" button for quick deactivation in case of emergencies.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSleep Mode: Automatically turns off the display after 5 minutes of inactivity to save power.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 6V-30V DC, supports micro USB 5.0V power supply.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e Quiescent current 20mA, operating current 50mA.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eSwitching Voltage:\u003c\/strong\u003e DC 30V 10A or AC 250V 10A.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eTrigger Voltage: \u003c\/strong\u003e5V DC\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eSupply Current: \u003c\/strong\u003e0.05A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eTime Range:\u003c\/strong\u003e 0.1s to 999 minutes.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eWorking Temperature:\u003c\/strong\u003e -40°C to 85°C.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 62.8 x 38 x 19 mm.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eOperation Modes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eP1 Mode:\u003c\/p\u003e\n\u003cp\u003eP1.1: After a trigger signal, the relay turns on for the set time (OP) and then turns off. Additional signals during OP are ignored.\u003c\/p\u003e\n\u003cp\u003eP1.2: After a trigger signal, the relay turns on for the set time (OP) and then turns off. Additional signals during OP restart the timer.\u003c\/p\u003e\n\u003cp\u003eP1.3: After a trigger signal, the relay turns on for the set time (OP) and then turns off. Additional signals during OP reset the timer and disconnect the relay.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eP2 Mode: After a trigger signal, the relay turns off for the set time (CL), then turns on for the set time (OP), and then turns off.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eP3 Mode:\u003c\/p\u003e\n\u003cp\u003eP3.1: After a trigger signal, the relay turns on for the set time (OP), then turns off for the set time (CL). This cycle repeats for the set number of cycles (LOP). Additional signals during the cycle stop the timing.\u003c\/p\u003e\n\u003cp\u003eP3.2: The relay turns on for the set time (OP), then turns off for the set time (CL). This cycle repeats for the set number of cycles (LOP) without needing a trigger signal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eP4 Mode: The relay stays connected as long as there is a trigger signal. When the signal disappears, the relay turns off after the set time (OP). If a new signal is received before the OP time is up, the timer resets.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSetting the Parameters:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e\u003cstrong\u003eSelect Operation Mode:\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003eEnsure the relay operation mode is appropriate.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe current operating mode will flash on the main interface (default is P1.1).\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLong press the SET button for 2 seconds to enter the selection interface mode. Use the UP and DOWN buttons to select the desired mode (P1.1 ~ Q4).\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e\u003cstrong\u003eAdjust Parameters:\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003eAfter selecting the mode, press the SET button to adjust the corresponding parameters (OP, CL, LOP). The parameter to be set will flash.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUse the UP and DOWN buttons to adjust the parameter values. Long press for quick adjustment or short press for single-unit increments\/decrements.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePress the STOP button to choose the decimal place and select the time interval (0.1 s to 999 min).\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePress SET to move to the next parameter. Repeat the process for all parameters.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e\u003cstrong\u003eFinalize Settings:\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\u003cli\u003e\u003cp\u003eAfter setting the parameters, long press the SET button to save the configuration and return to the main interface.\u003c\/p\u003e\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eMain Interface:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003eDisplays \"000\" when the relay is not working.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eShows a decimal point during the relay's operating state.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eAdditional Functions:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e\u003cstrong\u003eActivate Relay Mode:\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003eNO: The relay can connect after the power-over time (OP).\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOFF: The relay cannot connect in the off state.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePress the STOP button in the main interface to toggle between ON and OFF states.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e\u003cstrong\u003eSleep Mode:\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003eC-P Mode: Nixie tube display will turn off automatically after 5 minutes of no operation.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ed-Normal Mode: Nixie tube display stays on continuously.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePress and hold the STOP button for 2 seconds to toggle between C-P and d-Normal modes.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003ePackage Includes:\u003c\/p\u003e\u003cp\u003e1 x 6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle and LED Display\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62498001879411,"sku":"R1197","price":148.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/Relay-with-adjustable-timer.jpg?v=1773986178"},{"product_id":"1-channel-ac-220v-optocoupler-isolation-module","title":"1 Channel AC 220V Optocoupler Isolation Module","description":"\u003cp\u003eThe 1 Channel AC 220V Optocoupler Isolation Module, designed with a High Voltage Opto Isolator and powered by a 3-5V supply. This module is capable of sensing the presence of a 220V AC output at a TTL level, enabling detection via a microcontroller. It is also compatible with a PLC 24V level power supply.\u003c\/p\u003e\n\u003cp\u003eThe module features a distinct input and output circuit, both of which are electrically isolated from one another. The input circuit interfaces with the low-voltage side of your setup, while the output circuit connects to the high-voltage side. This isolation is facilitated by an optocoupler, a component that employs light to convey electrical signals, ensuring safe operation and reliable performance.\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62518660399475,"sku":"R1243","price":189.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/Gemini_Generated_Image_bhiejbbhiejbbhie.png?v=1771566117"},{"product_id":"4-channel-433mhz-rf-12v-relay","title":"4 CHANNEL 433MHZ RF 12V RELAY","description":"","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62591376458099,"sku":"R1399","price":559.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/4_channel_relay_with_cover.jpg?v=1774849114"},{"product_id":"5v-1-channel-ssr-module","title":"1 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse","description":"\u003cp\u003eThis is a 1 Channel 12V Solid State Relay Module. A solid-state relay (SSR) is just what it sounds like an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from lower-voltage DC control circuitry. They accomplish this by using infrared light as the ‘contact,’ a solid-state relay is just an IR LED and a photo Triac sealed up into a little box. Solid-state relays have several advantages over \u003cstrong\u003emechanical relays\u003c\/strong\u003e.\u003cbr\u003e\u003cbr\u003eA \u003cstrong\u003eSolid State Relay\u003c\/strong\u003e is similar to a mechanic relay and can be controlled through a digital signal. \u003cstrong\u003eSolid State Relay \u003c\/strong\u003egenerates no noise and has a much longer lifespan compared to the traditional mechanic relay.\u003cbr\u003e\u003cbr\u003eWhen the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62601835577715,"sku":"R1410","price":173.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/1Channel12VRelayModuleSolidStateLowLevelSSRDCControl250V2AwithResistiveFuse_720x_99294e14-1807-4033-9b89-9a6f4c676cba.jpg?v=1773366695"},{"product_id":"1-channel-12v-relay-board-1","title":"1 CHANNEL 12V RELAY BOARD","description":"\u003cp\u003e This 1-channel 12V 30A relay control board module with optocoupler modules is compliant with international safety standards, control and load areas isolation trenches it has a single relay a genuine. The inputs of the 1 Channel 12V 30A Relay Module are isolated to protect any delicate control circuitry. The power supply and relay instructions, lit, a disconnect are off. The input signal, signal, common Terminal and start conducting. It can be used as a single chip module for appliance control and work with both DC or AC signals where you can control the 220V AC load. Tags, 12V 1 Channel 30A Optocoupler Isolation Support High and Low-Level Trigger Switch Relay Module, 12V 30A Relay Module, 12V Relay module, 30A 12V Relay module.\u003c\/p\u003e\u003ctable class=\"border-collapse border border-gray-300\" style=\"min-width: 50px;\"\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"min-width: 25px;\"\u003e\n\u003ccol style=\"min-width: 25px;\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eRelay Type\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eSPDT (Single Pole Double Throw)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eControl Voltage\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e12V DC (control signal input)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eLED Indicator\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eOnboard LED to indicate the relay's status (active or not)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eLoad Voltage\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eCan control both AC (up to 120V or 240V) and DC (up to 14V) devices\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eRelay Contact Rating\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e30A at 120V AC \/ 10A at 240V AC or 30A at 14V DC\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eTrigger Type\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eActive Low (requires a low signal to activate)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62638411710835,"sku":"R1490","price":165.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/apt-1-channel-relay-board-12v-30a-new-500x500.jpg?v=1775401956"},{"product_id":"esp8266-esp-01-12v-2-channels-wifi-relay-module-things-smart-home-remote-control-switch","title":"ESP8266 ESP-01 12V 2 Channels WiFi Relay Module Things Smart Home Remote Control Switch","description":"\u003cp\u003eThe ESP8266 ESP-01 12V 2 Channels WiFi Relay Module is designed for smart home applications, employing the ESP-01 as the WiFi component and is compatible with 8-bit MCU chips. With a straightforward setup, users can wirelessly manage the dual relay functions using a mobile application within the local area network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eIntegrated high-performance microprocessor STM8S103 alongside ESP-01 WiFi modules.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThis module operates in two distinct modes:\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e       Mode 1: Direct connection of the mobile phone to the WiFi module.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e       Mode 2: Both mobile phones and WiFi modules connected to routers.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e       Additional feature: Functions as a USB relay when the ESP-01 module is removed.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTransmission range: In open conditions, the stable transmission distance can reach up to 100M when the mobile phone is connected directly to the WiFi module.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWhen both the WiFi module and mobile phone are linked to a router, the transmission distance will vary based on the router's signal strength.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUtilises Smartconfig technology via the mobile app for configuration of WiFi credentials, with built-in memory for the username and password.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eEquipped with a 5V, 10A\/\/250V AC 10A\/\/30V DC relay, capable of enduring 100,000 cycles, featuring diode discharge protection and rapid response times.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes a mode selection feature and a real-time status indicator for operational monitoring.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eContains a reserved UART debug interface and an STM8 SWIM programming download interface.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eTransmission Distance (m): 400\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRelay Channels: 2\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTrigger Voltage (VDC): 12\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSwitching Voltage (VAC): 250@10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSwitching Voltage (VDC): 30@10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBaud Rate: 9600\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDimensions (Length x Width x Height in mm): 59 x 40 x 20\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWeight (gm): 60\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Instructions:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease prepare the following before use:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e5V\/1A power adapter and the app “ESP Touch–Demo”\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStep 1: Connect the 12V\/1A power adapter to the IN+ and IN- terminals of the module.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStep 2: Install the app “ESP Touch–Demo” on your Android device. For first-time setup, configure the ESP-01 module in Mode 2 with your WiFi credentials.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStep 3: Install the app “Easy TCP–20” on your Android device, which serves as a TCP transmission tool for sending relay control commands. Select “SWITCH”, then input the relay control instructions in HEX format using the interface provided.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstructions for Operating Modes and Additional Function:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOperating Mode 1 (Mobile phone connected directly to the ESP-01 module):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003ePower on the ESP-01 module. After approximately 4 seconds, the green light will flash for 2 seconds, indicating configuration completion.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eConnect your mobile device to the AP hotspot signal broadcasted by the ESP–01 module.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOpen the “EasyTCP–20” app and tap “CONNECT”. Upon successful connection, the green light will change to a slow flash. You can now send commands to control the relay switch.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOperating Mode 2 (Mobile phones and WiFi modules connected to routers simultaneously):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003ePower the ESP–01 module, which will flash a green light. Press the S1 button to switch to Mode 2. The blue light will flash, and after about 1 minute, it will change to a 0.5-second flash, indicating readiness for WiFi configuration through the “ESP Touch–Demo” app.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eEnsure your mobile device is connected to the router. Open the “ESP Touch- Demo” app, input your router password, and tap “Confirm”.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWait for the configuration to succeed. When the app displays the ESP-01 IP address (e.g., 192.168.0.189), it indicates that the module is connected to the router and has saved your credentials for future connections (approximately 20-60 seconds).\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNote that the IP address (192.168.0.189) is dynamically assigned and may change on subsequent connections. The real-time IP can be viewed in the router’s device list.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOpen the “Easy TCP–20” app and click “CONNECT”. Upon successful connection, the green light will revert from a 2-second flash to a steady state. You can then issue commands to control the relay switch.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eThe initial configuration of the WiFi password may take longer (around 1 minute). Subsequent boot-ups will typically connect automatically within 20 seconds.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIf changing the router, a power cycle or pressing the S2 button will clear the previous WiFi credentials. Reconfigure the ESP–01 module with the new WiFi account and password in Mode 2.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIf the WiFi signal for the ESP–01 module is weak, the green light may extinguish, indicating a failed connection attempt. The module will try to reconnect automatically, with the green light flashing slowly during this process.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBoth Mode 1 and Mode 2 require the green light to flash slowly or be steady for further configuration or during the waiting process. The key input will be inactive during this time.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe ESP–01 module lacks a timeout mechanism; if connected to mobile data for more than 6 minutes, TCP will automatically disconnect. Re-establish the connection via the “EasyTCP–20” app by tapping\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62689651687795,"sku":"R1537","price":540.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/H04893ab0f53743c7ba4f64a0b7c6cac3L.png?v=1775581587"},{"product_id":"12v-1-channel-10a-relay-module","title":"12V 1 Channel 10A Relay Module","description":"\u003cp\u003eThe 12V 1 Channel 10A Relay Module is compact and user-friendly, designed to facilitate the control of a single 240V power device directly from an Arduino, Raspberry Pi, or other microcontrollers and low voltage circuits. It is an ideal solution for switching 240V appliances such as lights and fans, as well as powering high-performance motors at lower voltages.\u003c\/p\u003e\u003cp\u003eThis module incorporates a premium relay capable of handling a maximum load of 10A at 250V AC or 15A at 125V AC. Each relay features three connections—Common, Normally Open, and Normally Closed—accessible via 3 pin screw terminals, simplifying the process of connecting and disconnecting wires. Additionally, the board is equipped with a power indicator and a relay status LED to assist with troubleshooting. It is compatible with control inputs across a broad voltage range from 4V to 12V.\u003c\/p\u003e\u003cp\u003ePower input and relay control signals are available on header pins, allowing for seamless integration with our development boards using female to female jumper wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eTrigger Voltage (VDC): 12\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTrigger Current (mA): 20\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSwitching Voltage (VAC): 250@10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSwitching Voltage (VDC): 30@10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOperating Temperature (°C): -40 to 85\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOpt. Relative Humidity (RH): 20% ～ 85%\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStorage condition (℃): – 65 to 125\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDimensions: 48x29x17mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWeight: 15g\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelay output:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eNO: relay normally open interface.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCOM: relay common interface.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNC: normally closed relay interface.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e1 x 1 Channel 12V Low Level Trigger Relay Module for Arduino\u003c\/p\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62689972027763,"sku":"R1542","price":44.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/HTB1NZTTfpOWBuNjy0Fiq6xFxVXac.jpg?v=1775565289"},{"product_id":"rocker-switch-3-pin-6a-headlight-high-low-beam-pass-overtaking","title":"Rocker Switch 3 Pin 6A Headlight High Low Beam Pass Overtaking","description":"\u003cp\u003e Commonly used in household appliances, industrial equipment, automotive applications, and electronic devices. Safety  Some models include integrated fuses or breakers for added protection. \u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62692230005107,"sku":"R1352","price":8.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/3-pin-low-high-rocker-500x500.jpg?v=1776510939"},{"product_id":"esp8266-esp-01-12v-2-channels-wifi-relay-module-things-smart-home-remote-control-switch-1","title":"ESP8266 ESP-01 12V 2 Channels WiFi Relay Module Things Smart Home Remote Control Switch","description":"\u003cp\u003eThe ESP8266 ESP-01 12V 2 Channels WiFi Relay Module serves as an efficient Smart Home Remote Control Switch, utilizing the ESP-01 as its WiFi module and supporting compatibility with 8-bit MCU chips. A straightforward configuration allows users to manage the dual relay wirelessly via a mobile application on the local area network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFunctions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eEquipped with a high-performance STM8S103 microprocessor alongside the ESP-01 WiFi module.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe module supports two operational modes:\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e        Mode 1: Direct mobile phone connection to the WiFi module.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e        Mode 2: Mobile phones and WiFi modules connect through a router simultaneously.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e        Additional functionality: Functions as a USB relay when the ESP-01 is removed.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTransmission range: In an open environment, the maximum reliable transmission distance is 100M when the mobile phone is directly connected to the WiFi module.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWhen the WiFi module and mobile phone are connected via the router, the transmission distance is contingent upon the router’s signal strength.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUtilises Smartconfig technology via the mobile app to facilitate the configuration of WiFi credentials, with a feature to remember the configured username and password.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncorporates a 5V, 10A\/\/250V AC and 10A\/\/30V DC relay capable of operating continuously for up to 100,000 cycles, featuring diode discharge protection and a short response time.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes mode selection on the board and a real-time working status indicator.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFeatures a reserved UART debug interface and an STM8 SWIM programming download interface.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eTransmission Distance (m): 400\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRelay Channels: 2\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTrigger Voltage (VDC): 12\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSwitching Voltage (VAC): 250@10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSwitching Voltage (VDC): 30@10A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBaud Rate: 9600\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDimensions (Length x Width x Height in mm): 59 x 40 x 20\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWeight (gm): 60\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Instructions:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBefore use, gather the following tools:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e5V\/1A power adapter and the “ESP Touch–Demo” app\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStep 1: Connect the positive and negative terminals of the 12V\/1A power adapter to IN+ and IN- of the module, respectively.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStep 2: Install the “ESP Touch–Demo” app on your Android device. For the initial setup, use Mode 2 to configure the WiFi account and password for the ESP-01 module.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStep 3: Install “Easy TCP–20” on your Android device, which serves as a TCP transmission tool for sending relay control commands. Click “SWITCH” and enter the control commands and names in HEX format using the provided interface.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstructions for Operating Modes and Additional Functionality:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOperating Mode 1 (Mobile phone connected to the ESP-01 module):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003ePower up the ESP-01 module. After about 4 seconds, the green light will change from off to flashing every 2 seconds, indicating that configuration is complete.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eConnect your mobile device to the AP hotspot signal emitted by the ESP–01 module.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOpen the “EasyTCP–20” app and click “CONNECT”. Upon successful connection, the green light will transition from flashing every 2 seconds to a steady state. Click the gray box to send commands for relay control.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOperating Mode 2 (Mobile phones and WiFi modules connected via routers):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003ePower up the ESP–01 module; the green light will start blinking slowly. Press the S1 button to switch to Mode 2. The blue light will activate, and after about 1 minute, it will flash every 0.5 seconds, indicating it is awaiting configuration via the “ESP Touch–Demo” app.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eEnsure your phone is connected to the router. Open the “ESP Touch- Demo” app, input the router password, and click “Confirm”.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWait for successful configuration. The app will display the ESP-01 IP address (e.g., 192.168.0.189), confirming the module is connected to the router and will remember the credentials for future connections (typically 20-60 seconds).\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNote that the 192.168.0.189 IP address is dynamically assigned by the router and may change upon reconnection. Check the current IP address in the router’s device list.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOpen the “Easy TCP–20” app and click “CONNECT”. After a successful connection, the green light will change from flashing every 2 seconds to steady. Use the gray box to send relay control commands.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eFirst-time configuration of the WiFi password may take longer (approximately 1 minute). Subsequent boot-ups will require about 20 seconds for automatic reconnection.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTo change the router, you can either restart the module or press the S2 button (this will erase the stored WiFi credentials). Configure the ESP–01 WiFi details under Mode 2.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIf the ESP–01 module loses connection due to weak router signals, the green light will turn off while attempting to reconnect. During this time, the key will be inactive. Once the green light resumes a 2-second slow flash, it indicates reconnection attempts.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIn Modes 1 and 2, the green light must flash for 2 seconds or remain steady to indicate readiness for configuration. The key will be inactive during this time.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe ESP–01 module does not have\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62709189443955,"sku":"R1554","price":535.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/1206.webp?v=1776164624"},{"product_id":"xh-w3001-dc-12v-120w-digital-display-led-temperature-controller-with-thermostat-control-switch-probe","title":"XH-W3001 DC 12V 120W Digital Display LED Temperature Controller with Thermostat Control Switch Probe","description":"\u003cp\u003eIntroducing the XH-W3001 DC 12V 120W Digital Temperature Controller, a microcomputer-based thermostat switch designed for precise temperature measurement and control at an economical price point. This device boasts a remarkable temperature control precision of 0.1°C, with a measurement range spanning from -50°C to 110°C.\u003c\/p\u003e\u003cp\u003eThe LED display provides clear visibility of temperature readings. The XH-W3001 can be easily integrated into industrial control equipment panels for seamless installation. This temperature controller is equipped with a 1M probe made from stainless steel, ensuring it is waterproof and resistant to rust. Furthermore, its sensitive components are housed in ABS flame-retardant material, which is both non-toxic and environmentally friendly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDigital display LLL:\u003c\/strong\u003e Should the digital display read LLL, it indicates a fault with the sensor. You will need to either repair or replace the sensor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDigital display HHH:\u003c\/strong\u003e If the display shows HHH, this signifies that the detected temperature exceeds the measurement limits.\u003c\/p\u003e\u003ch2\u003e\n\u003cstrong\u003eBUTTON FUNCTIONS OF THE \u003c\/strong\u003eXH-W3001 CONTROLLER:\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\u003cp\u003ePress UP to display the starting temperature setting.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBy long-pressing the UP button, the display will begin to flash; you can then adjust the starting temperature value using the UP or DOWN buttons.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePress the DOWN button to halt the temperature measurement.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLong-pressing the DOWN button will cause the display to flash, allowing you to set the stopping temperature value using the UP or DOWN buttons.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eApplications:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eHatching environments\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncubation processes\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eEquipment enclosures\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAir conditioning units\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTemperature control systems\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCabinet cooling applications\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlso consider the XH-W3001 DC 24V 240W Digital Temperature Controller, a microcomputer-based thermostat switch specifically designed for heating control in refrigeration, ideal for seafood processing equipment.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\u003ctable class=\"border-collapse border border-gray-300\" style=\"min-width: 50px;\"\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"min-width: 25px;\"\u003e\n\u003ccol style=\"min-width: 25px;\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eDC Output\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eDC 12V 120W\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eTemperature Measuring Range\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003e-50~110°C\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eTemperature Control Range\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003e-50~110°C\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eControl Accuracy\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eUp to 0.1°C\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eDimensions \u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003e11 x 5 x 3cms \u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eWeight \u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-gray-300 p-2\" colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003e150 grams\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e","brand":"ROBODIUM","offers":[{"title":"Default Title","offer_id":62898479497587,"sku":"R1788","price":170.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/files\/51g4gvywrnl._sl1000.jpg?v=1780292268"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/3620\/7475\/collections\/no_backg_cat-relay_and_modules_7bdc4997-fd1e-4962-b685-7732145840dd.png?v=1773351330","url":"https:\/\/robodium.com\/collections\/relay-modules-relays\/connector.oembed","provider":"ROBODIUM","version":"1.0","type":"link"}