ROBODIUM DS18B20 Waterproof Digital Temperature Sensor Probe, 1-Wire Interface, -55C to 125C Range, 1 Meter Cable, 6mm x 30mm Probe, Stainless Steel, 0.5C Accuracy
- Product SKU: R0435
- Category: Arduino Ecosystem, Beginner Friendly, ESP32 & NodeMCU Ecosystem, IoT Projects, Sensor Only (Without Module), Sensors, Sensors, Sensors, Under ₹100
This is a 1 Meter Long Waterproof, sealed and pre-wired digital temperature sensor probe based on DS18B20 sensor. It is very handy for when you need to measure something far away, or in wet conditions. Because they are digital, you don't get any signal degradation even over long distance.
These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems.
The only downside is they use the Dallas 1-Wire protocol, which is somewhat complex, and requires a bunch of code to parse out the communication. When using with microcontroller put a 4.7k resistor to sensing pin, which is required as a pullup from the DATA to VCC line.
Cable specs:-
Stainless steel tube 6mm diameter by 30mm long
Cable is 36" long / 91cm, 4mm diameter (1 Meter Long)
Contains DS18B20 temperature sensor
Three wires - Red connects to 3-5V, Black connects to ground and White is data.
DS18B20 Sensor Technical specs:-
Usable temperature range: -55 to 125°C (-67°F to +257°F)
9 to 12 bit selectable resolution
Uses 1-Wire interface- requires only one digital pin for communication
Unique 64 bit ID burned into chip
Multiple sensors can share one pin
±0.5°C Accuracy from -10°C to +85°C
Temperature-limit alarm system
Query time is less than 750ms
Usable with 3.0V to 5.5V power/data
This is a 1 Meter Long Waterproof, sealed and pre-wired digital temperature sensor probe based on DS18B20 sensor. It is very handy for when you need to measure something far away, or in wet conditions. Because they are digital, you don't get any signal degradation even over long distance.
These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems.
The only downside is they use the Dallas 1-Wire protocol, which is somewhat complex, and requires a bunch of code to parse out the communication. When using with microcontroller put a 4.7k resistor to sensing pin, which is required as a pullup from the DATA to VCC line.
Cable specs:-
Stainless steel tube 6mm diameter by 30mm long
Cable is 36" long / 91cm, 4mm diameter (1 Meter Long)
Contains DS18B20 temperature sensor
Three wires - Red connects to 3-5V, Black connects to ground and White is data.
DS18B20 Sensor Technical specs:-
Usable temperature range: -55 to 125°C (-67°F to +257°F)
9 to 12 bit selectable resolution
Uses 1-Wire interface- requires only one digital pin for communication
Unique 64 bit ID burned into chip
Multiple sensors can share one pin
±0.5°C Accuracy from -10°C to +85°C
Temperature-limit alarm system
Query time is less than 750ms
Usable with 3.0V to 5.5V power/data
Return Policy Overview
At ROBODIUM™, we want you to be completely satisfied with your purchase. You may return most items within 7 days of delivery for a full refund or exchange.
Return Window
- Standard Returns: 7 days from delivery date for any reason, including if you simply changed your mind.
- Defective/Damaged Items: 7 days from delivery date for items received damaged or defective.
- Manufacturing Defects (Warranty): 15 days from delivery for manufacturing defects, unless a different warranty period is specified on the product page.
What Can Be Returned
Most items sold on ROBODIUM™ can be returned within the return window, including:
- Items you no longer need or changed your mind about
- Products received in damaged condition
- Items with manufacturing defects
- Wrong items received (item mismatch)
- Missing components inside the package
Return Conditions
To be eligible for a return, items must be:
- In their original, unused condition
- In the original packaging with all accessories, manuals, and free gifts (if any)
- Accompanied by proof of purchase
Note: Products damaged due to misuse, modification, static discharge, soldering, or improper handling may not be eligible for return.
How to Initiate a Return
- Contact us via email at support@robodium.com or call +91 8123109966
- Provide your order number and reason for return
- Submit photos/videos of the item (especially for damaged/defective products)
- Our team will review and approve your return request within 1-2 business days
Return Pickup Process
We arrange the return pickup for you - hassle-free returns similar to major e-commerce platforms.
- Once your return is approved, we will coordinate pickup from your location.
- Pack the product securely in its original packaging.
- Include a copy of the order confirmation or packing list.
- Keep the package ready - our logistics partner will collect it at the scheduled time.
Return Shipping Costs
- Defective, damaged, or wrong items: ROBODIUM™ covers all return shipping costs. No charges to you.
- Change of mind returns: A flat return shipping fee of ₹100 will be deducted from your refund amount.
Refund Process
- Refund Method: Refunds are processed to your original payment method.
- Processing Time: 5-7 business days after we receive and inspect the returned item.
- Refund Amount: Full purchase price minus any applicable return shipping fees.
- Orders canceled before shipping receive a full refund (minus up to 5% payment gateway charges, if applicable).
Replacements
- Once the returned item is inspected and approved, we ship the replacement at no additional cost.
- Replacement items are dispatched within 2 business days of receiving your return.
- If replacement is unavailable, we provide a full refund.
Warranty Terms
All products include a minimum 15-day warranty against manufacturing defects unless otherwise specified on the product page.
Warranty does not cover: misuse, soldering damage, modifications, physical damage, or incorrect electrical connections.
Order Cancellations
- Orders in Pending or Payment Verification status can be canceled for a full refund.
- Contact us immediately at support@robodium.com to cancel before shipping.
- Once an order is shipped, it cannot be canceled but can be returned after delivery.
Customer Service Commitment
- Email Response Time: Within 24 hours on business days
- Phone Support: Monday-Saturday, 10:00 AM - 6:00 PM IST
- Return Request Review: 1-2 business days
- Issue Resolution: Within 48 hours of verification
Need Help?
For any return, refund, or warranty questions, contact us:
📞 +91 8123109966 (Mon-Sat, 10 AM - 6 PM IST)
✉️ support@robodium.com
Last updated: January 2026
This return policy is accessible to all visitors without requiring login or registration.