Products

Sidebar

Categories

Availability

Price

₹
to
₹

Featured Products

20cm Jumper Wire 40pin Female to Female
ROBODIUM
20cm Jumper Wire 40pin Female to Female
Cable Type           -     Female to Female Material                 -     Plastic Length                   -     20 cm         Weight           ...
Rs. 48.00
Rs. 48.00
(-0%)
IR Sensor Module
ROBODIUM
IR Sensor Module
The IR Sensor Module is designed with excellent adaptability to ambient light and features a pair of infrared transmitter and receiver tubes. The infrared emitter sends out a signal at a specific frequency, and when an object is detected (i.e., a reflective surface is...
Rs. 26.00
Rs. 26.00
(-0%)
Tower Pro SG90 Servo - 9 gm Mini/Micro Servo Motor for MCU Raspberry Pi Arduino
ROBODIUM
Tower Pro SG90 Servo - 9 gm Mini/Micro Servo Motor for MCU Raspberry Pi Arduino
Tower Pro SG90 Servo - 9 gms Mini/Micro Servo MotorSpecification 3 pole ferrite, all nylon gear Top ball bearing Operating Voltage: 4.8V~6.0V Operating speed: 0.12sec/60 degree Output torque: 1.6kg/cm  4.8V Dimension: 21.5 x 11.8 x 22.7mm Weight: 9g
Rs. 99.00
Rs. 99.00
(-0%)

Taking Innovation to New Heights

Robodium-Empowering Curious Minds, Innovation Made Simple

Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • (1 Pair) 1045 10x4.5 Heavy Duty Props (With Spacers) for multirotors CW + CCW(1 Pair) 1045 10x4.5 Heavy Duty Props (With Spacers) for multirotors CW + CCW
    ROBODIUM
    (1 Pair) 1045 10x4.5 Heavy Duty Props (With Spacers) for multirotors CW + CCW
    The Orange HD Propellers 1045(10X4.5) ABS DJI Black is the high-quality propellers specially designed for multi-copters. These Orange Propellers are light in weight and high strength propeller has a 15° angle design at the end of the propeller to avoid whirlpool while the multi-copter...
    Rs. 55.00
    Rs. 55.00
    (-0%)
  • (16x2) Green LCD Display with I2C/IIC interface(16x2) Green LCD Display with I2C/IIC interface
    ROBODIUM
    (16x2) Green LCD Display with I2C/IIC interface
    The display is 16 character by 2 line display has a very clear and high contrast white text upon agreen background/backlight. This display overcomes the drawback of LCD 1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the...
    Rs. 149.00
    Rs. 149.00
    (-0%)
  • 0-100(99.9)V Digital Voltmeter Panel0-100(99.9)V Digital Voltmeter Panel
    ROBODIUM
    0-100(99.9)V Digital Voltmeter Panel
    The 0.56inch 0-100V Three Wire DC Voltmeter Red Panel requires only a few minutes of configuration. Using this Digital Voltmeter is as simple as directly connecting wires to the source you want to measure and seeing the LED blink. Best operates in the working voltage range...
    Rs. 69.00
    Rs. 69.00
    (-0%)
  • 0.36 Inch 4.5-30V Three Wire DC Voltmeter0.36 Inch 4.5-30V Three Wire DC Voltmeter
    ROBODIUM
    0.36 Inch 4.5-30V Three Wire DC Voltmeter
    This is a volt digital voltmeter with a 0.36 inch LED display that works with input voltages ranging from 4.5 to 30 volts. The metre's PCB assembly contains two mounting holes, allowing users to easily attach it on a panel or other surface. This...
    Rs. 57.82
    Rs. 57.82
    (-0%)
  • 030 DC 2.4V Carbon Brush High Speed Micro motor Professional Grade Blue030 DC 2.4V Carbon Brush High Speed Micro motor Professional Grade Blue
    ROBODIUM
    030 DC 2.4V Carbon Brush High Speed Micro motor Professional Grade Blue
    The 030 DC 2.4V Carbon Brush High-Speed Micro Motor is a professional-grade, high-performance motor designed for applications requiring rapid rotations at low voltage. It features a carbon brush mechanism, which enhances durability and longevity by reducing wear. With its compact size and lightweight structure,...
    Rs. 61.48
    Rs. 61.48
    (-0%)
  • 030 DC 3.2V Carbon Brush High Speed Micro motor Professional Grade Red030 DC 3.2V Carbon Brush High Speed Micro motor Professional Grade Red
    ROBODIUM
    030 DC 3.2V Carbon Brush High Speed Micro motor Professional Grade Red
    The 030 DC 2.4V Carbon Brush High-Speed Micro Motor is a professional-grade, high-performance motor designed for applications requiring rapid rotations at low voltage. It features a carbon brush mechanism, which enhances durability and longevity by reducing wear. With its compact size and lightweight structure,...
    Rs. 61.50
    Rs. 61.50
    (-0%)
  • 030 DC 3.7V Carbon Brush High Speed Micro motor Professional Grade Yellow030 DC 3.7V Carbon Brush High Speed Micro motor Professional Grade Yellow
    ROBODIUM
    030 DC 3.7V Carbon Brush High Speed Micro motor Professional Grade Yellow
    The 030 DC 2.4V Carbon Brush High-Speed Micro Motor is a professional-grade, high-performance motor designed for applications requiring rapid rotations at low voltage. It features a carbon brush mechanism, which enhances durability and longevity by reducing wear. With its compact size and lightweight structure,...
    Rs. 61.50
    Rs. 61.50
    (-0%)
  • 0408 Coreless coreless vibration Motor with eccentric wheel DC 3V-3.7V0408 Coreless coreless vibration Motor with eccentric wheel DC 3V-3.7V
    ROBODIUM
    0408 Coreless coreless vibration Motor with eccentric wheel DC 3V-3.7V
    The 0408 3V Hollow Cup Vibration Motor is a compact, lightweight motor designed for applications requiring subtle vibrations. With a 3V operating voltage, it offers low power consumption, making it ideal for handheld devices, wearables, and tactile feedback systems. The motor's hollow cup design...
    Rs. 49.00
    Rs. 49.00
    (-0%)
  • 1 CHANNEL 12V RELAY BOARD
    ROBODIUM
    1 CHANNEL 12V RELAY BOARD
     This 1-channel 12V 30A relay control board module with optocoupler modules is compliant with international safety standards, control and load areas isolation trenches it has a single relay a genuine. The inputs of the 1 Channel 12V 30A Relay Module are isolated to protect...
    Rs. 165.00
    Rs. 165.00
    (-0%)
  • 1 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse1 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
    ROBODIUM
    1 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
    This is a 1 Channel 12V Solid State Relay Module. A solid-state relay (SSR) is just what it sounds like an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from lower-voltage DC control circuitry. They accomplish this...
    Rs. 173.00
    Rs. 173.00
    (-0%)
  • 1 Channel 5V Relay Module with Optocoupler1 Channel 5V Relay Module with Optocoupler
    ROBODIUM
    1 Channel 5V Relay Module with Optocoupler
    This is a 1-channel 5V relay board module designed for use with Arduino, PIC, AVR, DSP, ARM, and various other microcontrollers. Each relay requires a driver current of 15mA to 20mA and is equipped with a high-current relay rated for DC 5V / 10A...
    Rs. 99.00
    Rs. 99.00
    (-0%)
  • 1 Channel AC 220V Optocoupler Isolation Module1 Channel AC 220V Optocoupler Isolation Module
    ROBODIUM
    1 Channel AC 220V Optocoupler Isolation Module
    The 1 Channel AC 220V Optocoupler Isolation Module, designed with a High Voltage Opto Isolator and powered by a 3-5V supply. This module is capable of sensing the presence of a 220V AC output at a TTL level, enabling detection via a microcontroller. It...
    Rs. 189.00
    Rs. 189.00
    (-0%)
  • 1.75mm Premium HS PLA Filament for 3D Printer (Mint Green)1.75mm Premium HS PLA Filament for 3D Printer (Mint Green)
    ROBODIUM
    1.75mm Premium HS PLA Filament for 3D Printer (Mint Green)
    1.75mm Premium HS PLA Filament for 3D Printer (Mint Green)The Premium HS PLA+ 1.75mm Filament in Mint Green is engineered for exceptional reliability and performance. With advanced winding technology, it minimizes tangles and enhances printing efficiency, ensuring seamless, uninterrupted prints. This filament boasts impressive...
    Rs. 785.00
    Rs. 785.00
    (-0%)
  • 1.75mm Premium HS PLA Filament for 3D Printer (Snow White)1.75mm Premium HS PLA Filament for 3D Printer (Snow White)
    ROBODIUM
    1.75mm Premium HS PLA Filament for 3D Printer (Snow White)
    1.75mm Premium HS PLA Filament for 3D Printer (Snow White) The Premium HS PLA+ 1.75mm Filament for 3D Printing in Snow White is a top-tier filament that guarantees outstanding performance and reliability. It utilises advanced winding technology to eliminate tangles and enhance printing efficiency,...
    Rs. 824.00
    Rs. 824.00
    (-0%)
  • 1.75mm Premium HS PLA+ Filament for 3D Printer (Raven Black)1.75mm Premium HS PLA+ Filament for 3D Printer (Raven Black)
    ROBODIUM
    1.75mm Premium HS PLA+ Filament for 3D Printer (Raven Black)
    1.75mm Premium HS PLA+ Filament for 3D Printer (Raven Black) The 1.75mm Premium HS PLA+ Filament in Raven Black is engineered for durability and superior performance in 3D printing. Utilising advanced winding technology, this filament minimises tangles, ensuring smooth and uninterrupted prints while enhancing...
    Rs. 824.00
    Rs. 824.00
    (-0%)
  • 1.8V-12V 2A DC Motor PWM Speed Regulator1.8V-12V 2A DC Motor PWM Speed Regulator
    ROBODIUM
    1.8V-12V 2A DC Motor PWM Speed Regulator
    The DC Motor PWM Speed Regulator is designed for 1.8V, 3V, 5V, 6V, and 12V systems, offering precise control over the speed of a DC motor. It utilizes Pulse-Width Modulation (PWM) to adjust the duty cycle from 0% to 100%, allowing for full-speed regulation....
    Rs. 68.00
    Rs. 68.00
    (-0%)
  • 1/2 inch Water Flow Sensor - YF-S2011/2 inch Water Flow Sensor - YF-S201
    ROBODIUM
    1/2 inch Water Flow Sensor - YF-S201
    Accurate flow measurement is crucial from both qualitative and economic perspectives. Flow meters have proven to be excellent devices for measuring water flow, and with the well-known YF-S201 water flow sensor, creating a water management system has become straightforward. For instance, you can build...
    Rs. 175.00
    Rs. 175.00
    (-0%)
    Notify me
    Notify me
  • 10 ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
    ROBODIUM
    10 ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
    This package includes 10 high-quality 10 ohm carbon film resistors, each rated for 1/4 Watt with a tolerance of 1%. Designed for ease of use, these resistors feature robust leads and clearly visible colour coding, making them ideal for breadboarding applications. The leads, measuring...
    Rs. 5.90
    Rs. 5.90
    (-0%)
  • 10 RPM - 12V DC Geared Motor (Centre Shaft )
    ROBODIUM
    10 RPM - 12V DC Geared Motor (Centre Shaft )
    DC Motor – 10RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the...
    Rs. 195.00
    Rs. 195.00
    (-0%)
  • 10-Pin Alligator Clip to Male Jumper Wire for Test Lead (20 cm)10-Pin Alligator Clip to Male Jumper Wire for Test Lead (20 cm)
    ROBODIUM
    10-Pin Alligator Clip to Male Jumper Wire for Test Lead (20 cm)
    Alligator clips and insulated clips are hardware products that clip onto and easily connect terminals and lead wires. The clip part that attaches to the terminal or lead wire on the alligator clip is uncovered. They are available in smaller sizes for low-voltage applications...
    Rs. 150.00
    Rs. 150.00
    (-0%)

Recently Viewed Products