NRF24L01 2.4GHz Wireless Transceiver Module - (Pack of 2)
- Product SKU: R1094
- Category: Arduino Ecosystem, Electronic Components, ESP32 & NodeMCU Ecosystem, Intermediate Projects, IoT Projects, Project Bundles, Quick Deliverables, Wireless & IOT, Wireless Module, Wireless-Iot, ₹100 to ₹500
Product Description
Great little solution's for wireless control capable of up to 2mbit communication with a range from 40 to 100m. Has on board antenna. The nRF24L01 is a single chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurst™), designed for ultra low power wireless applications.
The nRF24L01 is designed for operation in the world wide ISM frequency band at 2.400 - 2.4835GHz. An MCU (microcontroller) and very few external passive components are needed to design a radio system with the nRF24L01. The nRF24L01 is configured and operated through a Serial Peripheral Interface (SPI.) Through this interface the register map is available. The register map contains all configuration registers in the nRF24L01 and is accessible in all operation modes of the chip.
The embedded baseband protocol engine (Enhanced ShockBurst™) is based on packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Internal FIFOs ensure a smooth data flow between the radio front end and the system’s MCU. Enhanced ShockBurst™ reduces system cost by handling all the high-speed link layer operations. The radio front end uses GFSK modulation. It has user configurable parameters like frequency channel, output power and air data rate.
Features of NRF24L01 2.4GHz Wireless Transceiver Module:-
- NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz
- Wireless transceiver including: Frequency generator, enhanced type, SchockBurstTM, mode controller, power amplifier, crystal amplifier, modulator, demodulator
- The output power channel selection and protocol settings can be set extremely low current consumption, through the SPI interface
- As the transmit mode, the transmit power is 6dBm, the current is 9.0mA, the accepted mode current is 12.3mA, the current consumption of the power-down mode and standby mode are lower
- Built-in 2.4GHz antenna, supports up to six channels of data reception
- Size: 15 x 29mm
- Low operating voltage: 1.9-3.6V
- 125 channels, multi-point communication and frequency hopping to meet the communication needs
- High Rate: 2Mbps, as air transmission time is very short, greatly reducing collision phenomena in wireless transmission (air transfer rate of software setting: 1Mbps or 2Mbps)
- Low power consumption: When the answer mode communication, fast air transmission and start-up time, which greatly reduces the current consumption
- Low application cost: NRF24L01 integrated part of all high-speed signal processing related to RF protocol, such as: automatic retransmission of lost packets and automatically generate response signals, etc.
- NRF24L01 SPI interface: hardware SPI port, MCU I/O ports
-
Internal FIFO compatible with a variety of microprocessor interface, micro-controller is convenient
Package Includes:
- 2 x NRF24L01 2.4GHz Wireless Transceiver Module
Product Description
Great little solution's for wireless control capable of up to 2mbit communication with a range from 40 to 100m. Has on board antenna. The nRF24L01 is a single chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurst™), designed for ultra low power wireless applications.
The nRF24L01 is designed for operation in the world wide ISM frequency band at 2.400 - 2.4835GHz. An MCU (microcontroller) and very few external passive components are needed to design a radio system with the nRF24L01. The nRF24L01 is configured and operated through a Serial Peripheral Interface (SPI.) Through this interface the register map is available. The register map contains all configuration registers in the nRF24L01 and is accessible in all operation modes of the chip.
The embedded baseband protocol engine (Enhanced ShockBurst™) is based on packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Internal FIFOs ensure a smooth data flow between the radio front end and the system’s MCU. Enhanced ShockBurst™ reduces system cost by handling all the high-speed link layer operations. The radio front end uses GFSK modulation. It has user configurable parameters like frequency channel, output power and air data rate.
Features of NRF24L01 2.4GHz Wireless Transceiver Module:-
- NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz
- Wireless transceiver including: Frequency generator, enhanced type, SchockBurstTM, mode controller, power amplifier, crystal amplifier, modulator, demodulator
- The output power channel selection and protocol settings can be set extremely low current consumption, through the SPI interface
- As the transmit mode, the transmit power is 6dBm, the current is 9.0mA, the accepted mode current is 12.3mA, the current consumption of the power-down mode and standby mode are lower
- Built-in 2.4GHz antenna, supports up to six channels of data reception
- Size: 15 x 29mm
- Low operating voltage: 1.9-3.6V
- 125 channels, multi-point communication and frequency hopping to meet the communication needs
- High Rate: 2Mbps, as air transmission time is very short, greatly reducing collision phenomena in wireless transmission (air transfer rate of software setting: 1Mbps or 2Mbps)
- Low power consumption: When the answer mode communication, fast air transmission and start-up time, which greatly reduces the current consumption
- Low application cost: NRF24L01 integrated part of all high-speed signal processing related to RF protocol, such as: automatic retransmission of lost packets and automatically generate response signals, etc.
- NRF24L01 SPI interface: hardware SPI port, MCU I/O ports
-
Internal FIFO compatible with a variety of microprocessor interface, micro-controller is convenient
Package Includes:
- 2 x NRF24L01 2.4GHz Wireless Transceiver Module
Return Policy Overview
At ROBODIUM™, we want you to be completely satisfied with your purchase. You may return most items within 7 days of delivery for a full refund or exchange.
Return Window
- Standard Returns: 7 days from delivery date for any reason, including if you simply changed your mind.
- Defective/Damaged Items: 7 days from delivery date for items received damaged or defective.
- Manufacturing Defects (Warranty): 15 days from delivery for manufacturing defects, unless a different warranty period is specified on the product page.
What Can Be Returned
Most items sold on ROBODIUM™ can be returned within the return window, including:
- Items you no longer need or changed your mind about
- Products received in damaged condition
- Items with manufacturing defects
- Wrong items received (item mismatch)
- Missing components inside the package
Return Conditions
To be eligible for a return, items must be:
- In their original, unused condition
- In the original packaging with all accessories, manuals, and free gifts (if any)
- Accompanied by proof of purchase
Note: Products damaged due to misuse, modification, static discharge, soldering, or improper handling may not be eligible for return.
How to Initiate a Return
- Contact us via email at support@robodium.com or call +91 8123109966
- Provide your order number and reason for return
- Submit photos/videos of the item (especially for damaged/defective products)
- Our team will review and approve your return request within 1-2 business days
Return Pickup Process
We arrange the return pickup for you - hassle-free returns similar to major e-commerce platforms.
- Once your return is approved, we will coordinate pickup from your location.
- Pack the product securely in its original packaging.
- Include a copy of the order confirmation or packing list.
- Keep the package ready - our logistics partner will collect it at the scheduled time.
Return Shipping Costs
- Defective, damaged, or wrong items: ROBODIUM™ covers all return shipping costs. No charges to you.
- Change of mind returns: A flat return shipping fee of ₹100 will be deducted from your refund amount.
Refund Process
- Refund Method: Refunds are processed to your original payment method.
- Processing Time: 5-7 business days after we receive and inspect the returned item.
- Refund Amount: Full purchase price minus any applicable return shipping fees.
- Orders canceled before shipping receive a full refund (minus up to 5% payment gateway charges, if applicable).
Replacements
- Once the returned item is inspected and approved, we ship the replacement at no additional cost.
- Replacement items are dispatched within 2 business days of receiving your return.
- If replacement is unavailable, we provide a full refund.
Warranty Terms
All products include a minimum 15-day warranty against manufacturing defects unless otherwise specified on the product page.
Warranty does not cover: misuse, soldering damage, modifications, physical damage, or incorrect electrical connections.
Order Cancellations
- Orders in Pending or Payment Verification status can be canceled for a full refund.
- Contact us immediately at support@robodium.com to cancel before shipping.
- Once an order is shipped, it cannot be canceled but can be returned after delivery.
Customer Service Commitment
- Email Response Time: Within 24 hours on business days
- Phone Support: Monday-Saturday, 10:00 AM - 6:00 PM IST
- Return Request Review: 1-2 business days
- Issue Resolution: Within 48 hours of verification
Need Help?
For any return, refund, or warranty questions, contact us:
📞 +91 8123109966 (Mon-Sat, 10 AM - 6 PM IST)
✉️ support@robodium.com
Last updated: January 2026
This return policy is accessible to all visitors without requiring login or registration.
