Filter
21 results
20
- 10
- 15
- 20
- 25
- 30
- 50
Best selling
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Nano 328P Expansion Adapter Breakout Board IO ShieldVendor:ROBODIUMThe Nano 328P Expansion Adapter Breakout Board IO Shield acts as a breakout board for the Arduino Nano microcontroller. There are several different options for power input and the footprint of this board is the same as the Arduino Duemilanove. In addition, each pinout includes 5V and GND...
- Rs. 84.00
- Rs. 84.00
- (-0%)
- Unit price
- / per
-
ULN2003 Stepper Motor Driver Board Module for DC 5V 4-phase 5 line 28BYJ-48 For ArduinoVendor:ROBODIUMDescription: Brand new with high quality Rated Voltage: DC5V-12V 4-phase Reduction Ratio: 1/64 Step Torque Angle: 5.625°/64 DC Resistance: 200ω±7% (25°) Insulation Resistance: >10Mω (500V) Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque:...
- Rs. 0.00
- Rs. 0.00
- (-0%)
- Unit price
- / per
-
L298N Motor Driver ModuleVendor:ROBODIUML98 Motor Driver Board It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepper motors. Two enable inputs are provided to enable or disable the device...
- Rs. 179.00
- Rs. 179.00
- (-0%)
- Unit price
- / per
-
L9110S Dual Channel H-Bridge Motor Driver ModuleVendor:ROBODIUMThe L9110S dual-channel H-bridge motor driver module is a compact board designed for driving small robots. It is built around the L9110 Motor Driver IC and features two independent motor driver chips, each capable of handling up to 800mA of continuous current. The module...
- Rs. 59.00
- Rs. 59.00
- (-0%)
- Unit price
- / per
-
L298N Dual H Bridge DC/Stepper Motor Driver Controller ModuleVendor:ROBODIUMThis motor driver for DC and stepper motors is highly regarded due to its use of the renowned L298N Dual H Bridge Driver Chip. It is designed for optimal performance at an affordable price. The L298N Dual H Bridge DC/Stepper Motor Driver Controller Module...
- Rs. 177.00
- Rs. 177.00
- (-0%)
- Unit price
- / per
-
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver Good QualityVendor:ROBODIUMThis 5V DC 28BYJ-48 Stepper Motor is a compact, affordable, and high-quality geared stepper motor. The combination of the 28BYJ-48 Stepper Motor and the ULN2003 Stepper Motor Driver is highly regarded for its stability and reliability. The 28BYJ-48 stepper motor is sourced from one...
- Rs. 120.00
- Rs. 120.00
- (-0%)
- Unit price
- / per
-
BIGTREETECH BTT TMC2209 V1.3 Stepper Motor DriverVendor:ROBODIUMThis is a BIGTREETECH BTT TMC2209 V1.3 Stepper Motor Driver. TMC 2209 driver v1.3 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 2.0A, peak current 2.8A, voltage range 4.75V-29V, 256 subdivision. The flexible micro Plyer interpolation unit provides up to 256...
- Rs. 525.00
- Rs. 525.00
- (-0%)
- Unit price
- / per
-
DRV8825 Stepper Motor Driver ModuleVendor:ROBODIUMLooking to control a stepper motor using an Arduino, Raspberry Pi, or any other microcontroller? This stepper motor driver will streamline your coding process and offer greater flexibility in controlling the motor. The DRV8825 stepper motor driver carrier is a breakout board designed for...
- Rs. 101.00
- Rs. 101.00
- (-0%)
- Unit price
- / per
-
Green A4988 driver Stepper Motor Driver- Normal QualityVendor:ROBODIUMThe Green A4988 Stepper Motor Driver - Normal Quality is a comprehensive micro-stepping motor driver with an integrated converter, making it user-friendly. It operates within a voltage range of 8V to 35V and can deliver around 1A per phase without the need for a...
- Rs. 67.00
- Rs. 67.00
- (-0%)
- Unit price
- / per
-
L293D Motor Driver BoardVendor:ROBODIUMThis L293D driver module is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L293D motor driver IC. It can drive 4 DC motors in one direction, or drive 2 DC motors in both the directions....
- Rs. 96.00
- Rs. 96.00
- (-0%)
- Unit price
- / per
-
DRV8833 2 Channel DC Motor DriverVendor:ROBODIUMThe DRV8833 is a dual H-bridge motor driver IC designed for bidirectional control of two brushed DC motors operating between 2.7V and 10.8V. It provides a continuous current of up to 1.2 A per channel, with the ability to handle peak currents of up...
- Rs. 58.00
- Rs. 58.00
- (-0%)
- Unit price
- / per
-
A4988 Stepper Motor Driver ModuleVendor:ROBODIUMDescription:- The A4988 Module is a compact and cost-effective breakout board featuring Allegro’s A4988 stepper motor driver. It offers multiple benefits such as adjustable current limiting, over-temperature and over-current protection, and supports five different step resolutions. With an input voltage range of 8V to...
- Rs. 78.00
- Rs. 78.00
- (-0%)
- Unit price
- / per
-
DM542 Digital Stepper Motor DriverVendor:ROBODIUMThe DM542 Digital Stepper Motor Driver is an economical micro-stepping driver and suitable for driving 2-phase and 4-phase hybrid stepping motors. By using the advanced bipolar constant-current chopping technique, it can output more speed and torque from the same motor, compared with traditional drivers,...
- Rs. 885.00
- Rs. 885.00
- (-0%)
- Unit price
- / per
-
PCA9685 16 Channel Servo Motor Driver(Soldered)Vendor:ROBODIUMThis is PCA9685 16 Channel Servo Motor Driver(Soldered) The operating voltage: 2.3V to 5.5V This has 5.5V tolerant inputs This can operate at minus 40 degrees Celsius to 85 degrees Celsius Software reset feature (SWRST Call) allows the device via I2C bus reset 25MHz...
- Rs. 235.00
- Rs. 235.00
- (-0%)
- Unit price
- / per
-
L293D Motor Driver IC Module Board (Made in India)Vendor:ROBODIUML293D Motor Driver IC Module Board The L293D Motor Driver IC Module Board is a simple and useful tool for controlling motors in projects like robots and other machines. It uses the L293D IC, which can control two DC motors or stepper motors at...
- Rs. 81.00
- Rs. 81.00
- (-0%)
- Unit price
- / per
-
SG90 Micro Servo Motor with PCA9685 16 Channel Servo Motor Driver(Soldered) Combo (5 SG90 Motors + 1 PCA9685 Board)Vendor:ROBODIUMProduct description Overview: This comprehensive combo kit includes 5 SG90 micro servo motors and a 16-channel 12-bit PWM servo driver module based on the PCA9685 chipset. It offers seamless control of multiple servos using just two I2C pins, making it ideal for robotics and automation...
- Rs. 581.00
- Rs. 581.00
- (-0%)
- Unit price
- / per
-
PCA9685 16 Channel Servo Motor Driver(Soldered)- (Pack of 2)Vendor:ROBODIUMPCA9685 16 Channel Servo Motor Driver(Soldered) This is 16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685. You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you...
- Rs. 1,283.00
- Rs. 1,283.00
- (-0%)
- Unit price
- / per
-
L293D Motor Driver Shield For Microcontrollers - 4 Channel Driver - Pack Of 2Vendor:ROBODIUMProduct Description This L293D Motor Driver Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project. This Arduino...
- Rs. 322.00
- Rs. 322.00
- (-0%)
- Unit price
- / per
-
L298N Motor Driver Controller Board Module Dual H-Bridge DC Stepper Driver for Arduino (Pack of 2)Vendor:ROBODIUML98 Motor Driver Board It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepper motors. Two enable inputs are provided to enable or disable the device...
- Rs. 359.00
- Rs. 359.00
- (-0%)
- Unit price
- / per
-
L293D 4 Channel DC Motor DriverVendor:ROBODIUML293D 4 Channel DC Motor Driver Motor Drive Board L293D Module For Arduino UNO MEGA 2560 is a Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such...
- Rs. 72.00
- Rs. 72.00
- (-0%)
- Unit price
- / per
















